K25JK series 2 position 5 way pneumatic-control stop valve
Introduction:
K25JK series two position five way pneumatic control stop valve is a monostable stop directional valve, which has the advantages of few sliding mating surfaces, simple structure and strong dust resistance. Due to the low requirements for gas source and environmental conditions, it is especially suitable for working places with poor environmental conditions such as steel and casting and explosion-proof requirements.
Model code：
1.PP- pneumatic element
2.working position: 2 position 5 way
3.J-stop structure
4.control mode: K-single pneumatic control
5.DN:6,8,10,15mm
Models in stock:
K25JK-6 K25JK-8 K25JK-10 K25JK-15
Technical parameters:
| model | K25JK-6 | K25JK-8 | K25JK-10 | K25JK-15 |
| working medium | compressed air |
| working pressure（MPa） | 0.2 ~ 0.8 |
| Min. control pressure(0.5MPa) | 0.3 | 0.2 |
| reversing time≤(S） | 0.08 |
| reversing frequency≥（Hz） | 6 |
| effective area≥(mm²) | 10 | 20 | 40 | 60 |
| leakage(≤ cm3/min) | 100 |
| ambient temperature(℃） | 5~50 |
| durability≥(ten thousand times) | 150 |
Structure:
