RG petro is one fo the largest manufacturers of petroleum drilling euipment in China

RG PETRO MACHINERY (GROUP) CO. LTD is one fo the largest manufacturers of petroleum drilling euipment in China.

Equipment: RG 1300 Land Rig

Manufacturer: RG – Petro

I-DRAWWORKS

 RG Model JC28E, max speed 450 rpm – API spec 7K

 Rated @ 1300 HP

 Fast line pull 62,107 lbs

 Diameter: 40 inch x 25 inches

 ATD 330H axial thrust disc clutch

 Drawworks fitted with disc brakes – 14,330 lbs positive pressure per rim

 Disc brakes have separate hydraulic system

 Eaton model 324 auxiliary brake – water cool – separate tankage

 1 1/4” drill line – 6 x 5 traveling system – 0.65 fps to 3.94 fps hoisting speeds

 Crown-O-Matic toggle valve crown saver

TRAILER

 Model ES 9660 (171,960 Lbs.) with Mast Crown and Standpipe

 (5) axle, triple steel board, balanced suspension. (2) Air lift (3) Spring, 12 x 20 double tires

 OAL 50’ L x 10’10” W x 14’ H with Mast on

 Back overhang 5’4”

 Axle spacing 4’6”

 (5) x 26,000 lbs. axles

II-SUBSTRUCTURE

 Model ZZ225 rated at 500,000 lbs – pull test 580K

 Height – 19.7 feet (scoped up)

 11’6” W x 30’ L x 10’3” H (scoped down)

 Clear area under beams – 15.7 feet

 Mechanical raise with adjustments for uneven locations

 Floor – 24 feet x 20 feet Complete with 2 walkways, and trailer walkway ladder

III-DERRICK AND TRAVELING EQUIPMENT

 Mast Model JJ22 – API 4F Double (125’ x 500,000 lbs.)

 53’10” (scoped in)

 Board heights – 72.2 feet/ 75 feet/ 78.7 feet

 Raising speed – 12 minutes from horizontal

 Hydraulically scoped

 13,500 feet 4 ½” pipe racking capacity

 Wind resistance – 110 km/hr

 Complete with explosion-proof lighting

 Complete with Geronimo line, sala block, tong cylinders

 4 inch x 7000 psi standpipe and 3” ID x 60’ kelly hose

 Crown Model TC225, 250-Ton capacity, 10 lines

IV-ROTARY DRIVE SYSTEM

 Model ZP 275 – 27 ½ inch opening rated @ 500-Ton– API 7K (Missing R/T but could use Georgia R/T)

 Max speed – 300 rpm

 Static loading – 1,000,000 lbs

 Torque – 20,265 foot lbs

 Complete with 1, 2, and 3 bowls

 Pin or square bushing drive available

 Right Angle Gear Box Driven

 Permanent and ratcheting type locking systems

 Rotary torque sensor

 Master bushing rated for 500 Tons with API #3 interior – Pin drive

 Set of bushing pullers

 Bit breaker plate

V-LIQUID MUD SYSTEM

 2 Each mud tanks and slugging pit 1000 BBLS total capacity

 51’ L x 10’ W x 10’ H c/w loading hitches

 Process tank 70 BBLS

 Mud tanks fitted with 10 HP Mud Agitators

 Two (2) 6 x 5 x 11 centrifugal Mud Mixing pumps with OSHA guards, 50HP explosion proof motors. Two (2) 6 x 8 x 11 Mud Process centrifugal pumps with OSHA Guards, 75HP explosion proof motors.

VI-CAPACITIES

 Fuel Oil: 10,000 gallons 34’ L x 8’ W x 10’ H skidded c/w loading hitches

 Liquid mud: 930 barrels

 Process tank: 70 barrels

 Drill Water: 18,000 gallons 30’ L x 10’ W x 10’ H skidded c/w loading hitches

VII-RIG POWER

 Two each Caterpillar C-18 (AR# 237-1955), (SN# WJH01434), (AR# 237-1955), (SN# WJH01431) electronic engines complete with Alison 6061 transmissions

 Two redundant hydraulic pumps mounted on transmissions for raising/lowering Mast

 Compound box Model BXJ, input speed max 2500 rpm, output torque 19,176 foot lbs

 Rotary transmission – Model ZX140, 2100rpm max, input torque 10,360 foot lbs

VIII-GENERATOR HOUSE

 Two Volvo diesel engines (Model TAD1641GE) 1800 RPM, 565Kw

 Two Samford generators 400 Kw, 60 Hz, 3Ph, 1800 RPM

 Electronic engine control panels (2)

 Fully enclosed house31’ L x 9’7” W x 10’6” H c/w loading hitches

IX-MCC HOUSE

 RG System – 3 gen cubicles – 4 MCC cubicles

 500 kva 480 to 240/110 VAC transforms

 480 vac MCC panel

 Air conditioned house c/w work desk, interior lighting, outside plug in receptacle panel

 MCC House 31’3” L x 9’ W x 10’6” H c/w loading hitches

X-AIR COMPRESSOR HOUSE

 Sullair (2) 220 CFM screw compressors Model LS12-50HHAC SULL, SN# 88290006-329

 (2) 400-gallon air receivers ASME approved

 125 gallon air receiver drawworks motors

 SRC 200 Dryer refrigerant

 SRC 220 dryer

 Two each 50HP Model LS12-50H helical air compressors, 50 HP, 37 Kw, 187 cfm

 Separator and volume tanks

 Fully enclosed house 32’ L x 9’9” W x 10’ H c/w loading hitches

XI-BLOW OUT PREVENTION SYSTEM

 One (1) Accumulator System Burnsco 5 Station 3000psi working pressure, with 2 each 60:1 air pumps and 1 each 15hp electric motor driven triplex pump with 7/8” plungers – 11 gallon bladder type bottles – ASME vessels, Drillers Control Panel – API compliant unit, master skidded c/w loading hitches

 Rams fitted as 4-1/2” drill pipe and blind

 BOP Handling system

10-Ton hand operated chain hoist with 10’ of fall

XII-AUXILLIARY EQUIPMENT

 Brake cooling tank with pumps and heat exchanger (below Drill House – one skid)

 One x 8,000 gallon fuel tank – skidded – with transfer pumps c/w loading hitches

 One 16,000 gallon water tank – skidded – with transfer and fire pump c/w loading hitches

 (2) 20’ containers with associated spare parts/components for deck engines, drawworks and drive lines.

 Junk Box 14’ L x 5’5” W x 5’ H (Full complement of handling tools)

 Two hydraulic cathead cylinders – 33,708 lbs pull

 Two draworks winches – 3 short tons and 5 short tons

 One swivel Model SL225 – 250-Ton x 5000 psi x 6 5/8 Regular LH connection

 One Unimatic/Shorty assm Hook/Block combo 5 sheaves cluster grooved for 1-1/4” – Model YG225 – Load rated @ 250-Ton

 Global Safety valves (2) NC46 Grey inside BOPS with releasing tools, (2) NC46 one piece Hydril Style lower Kelly Valves, (1) 6-5/8” LH API Reg Upper Kelly Cock

 Misc. Subs: Ace Machine (3) NC46 wear subs 10” OAL, NC46 x 6-5/8” reg bit subs, (2) NC46 x 4-1/2” reg bit subs, (2) NC46 Rubber Kelly Saver Subs

 Deadline Anchor with E-80 sensator – Type D Style

 Oteco Mud bucker dressed for 4-1/2” drill pipe

 Fire fighting/Safety extinguishes 10 to 30 lbs

 Sala blocks

 Lad Safety system for Mast Handling Tools

 (1) Set MU and BO tong with heads to 8-1/4” rated @ 55,000 ft/lbs

 (2) Sets 4-1/2” x 4-1/2” Varco SDXL drill pipe slips

 (1) Set 4-1/2” MGG 250-Ton bottle neck elevators

 (1) Drill collars slips for 6-3/4” collars

 Slickline unit 5 Star Surveyor

 5-Star .092 x 15,000’ slickline electric over hydraulic unit

XIII-DRILLERS CONTROL STATION AND CONTROL HOUSE

 Fully enclosed with explosion proof A/C

 Joystick control of draworks – 6 speeds

 Full instrumentation package – hook, pump pressure, torque, rpm, tong torque and strokes

 Electronic package for pit volumes

 Shenkai FS Type Weight indicator system

 (2) Type D and F threaded and flanged psi gauge for mud and choke systems