KCB Gear Pump
Model available at
KCB-18.3,2CY-1.1/1.45
KCB-33.3,2CY-2/1.45
KCB-55,2CY-3.3/0.33
KCB-83.3,2CY-5/0.33
KCB-135,2CY-8/0.33
KCB-200,2CY-12/0.33
KCB-300,2CY-18/0.36
KCB-483.3,2CY-29/0.36
KCB-633,2CY-38/0.28
KCB-960,2CY-58/0.28
KCB-1200,KCB-1600,KCB-1800,KCB-2500,KCB-2850,KCB-3800,KCB-4100,KCB-5400,KCB-5600
KCB-7600,KCB-7000,KCB-9600
Technical parameter:
Flow: 1.1m3/h~570m3/h
Discharge pressure: 0.28mpa~1.45mpa
Speed: 720rpm~2900rpm
Dia of inlet & outlet: 3/4"~350mm
Application:
This series pump applies to delivering non-corrosive lubricating-oil or equivalent liquid without solid particles and fiber at temperature below 300 centigrade and with the viscosity of 5-1500cst.
Application scope:
It can give performance as transfer pump or booster pump in oil delivery system. It can be also applied as a fuel pump for delivery system, pressurization and injection in fuel supply system and in all industry fields as lubricating pump.
Structure features
KCB series gear pumps are mainly composed of gears, axles pump body, pump, cap safety valve and axle-end seals etc. The heat treated gears have the advantage of higher hardness and intensity, and rotate with the axles inside the replaceable bearing sleeves. All of pump's parts can be lubricated by delivered medium when working.
The pump is properly designed with leakage and return chute, which lets the gears bear the least torque force and reduces load and wear on bearings bear the least torque force and reduces load and wear on bearings in order to raise pump's efficiency.
It is also designed with safety valve for protection against overload. The full return flow pressure of the safety valve is 1.5times higher than the rated exhaust pressure of the pump. It can be also adjusted within the allowance of exhaust pressure range according to circumstances.
But please note the safety valve can't be applied as pressure-reducing valve for long time. You may install pressure-reducing valve separately on pipe-line if needed.
